⛏️6. Start Mining

Duino-Coin is a coin that can be mined with Arduinos, ESP8266/32 boards, Raspberry Pis, computers, and many more including Wi-Fi routers, smart TVs, smartphones, smartwatches, SBCs, MCUs or even GPUs

Plug your beautiful Duino Solo Miner device into a usb port and enjoy!

The ESP32 CrowPanel-S3, T-Display-S3, & T-Dongle-S3 devices are dual-core and multi-threads.

Both cores are used to mine and several threads are used to implementing some monitor and wifi stuff. It comes with several screens to monitor it's working procedure and also to show you some network mining stats. -> Expected Hashrate: 37-45 Kh/s per core

Main Screens

Elecrow CrowPanel 3.5 inch ESP32 terminal

Elecrow CrowPanel 3.5 inch Main Dashboard

T-Display-S3

Main Dashboard

Clock | Balance

About

T-Dongle-S3

Main Dashboard

Clock | Balance

When the application starts up, it first checks the wifi connection for a maximum of 90 seconds, then loads some global data and finally launches the miner(s)

Buttons with the USB-C port to the right

Only for T-Display & T-Dongle-S3

• Top Button

  • One click -> change screen to Main | Balance | Clock | About

  • Hold 5 seconds -> reset the configuration and reboot your DuinoMiner. Entering Config mode on next boot!

  • Hold and power up -> enter the configuration mode, granting access to modify the current configuration via Wi-Fi or adjust/verify settings

• Bottom Button for the T-Display only

  • One Click -> turn the screen off and on